|
|
|
|
|
|
 |
|
| |
Comfortable KTM Seat. These words have never belonged in the same sentence. Until now! For 2004-05 KTM’s, we have developed the latest in seat technology. Our new complete seat was designed & manufactured right here in the USA. It offers all day riding comfort with a redesigned seat pan that allows for an additional 1.50" Inches of foam without changing the seat height.
It also features air channels built in to maximize airflow to the airbox. We also added a new rubberized foam that resists breakdown, but is still soft so your not riding on the seat pan after a few rides. we finished it off with a partial gripper seat cover that has just the right amount of traction. Want more height? Order a tall and gain an additional 1.250 inches of cushion for more leg room.
Note: The 75-300 is the super soft, standard height version that allows you to sink farther for a lower seat height. The 75-400 is a tall firm version that is still comfortable yet does not sink in as far as the tall soft.
Here is what people are saying about our seat:
"We also found the stock seat to be uncomfortably thin, stiff and too low for most of our testers. The cure for this is the new Enduro Engineering seat". "We put one of their tall/soft seats on our test bike and everybody loved it."
-Trail Rider Magazine April 05 KTM 400RFS test
"EE has come up with the most desirable aftermarket accessory for every new KTM"
-8x National Enduro Champion Dick Burleson, Dirt Rider Test, August 2004
"Your seat is a huge improvement over the stock one"
-Off Road Legend Malcolm Smith
"The EE seat was my very first modification, I could not take the stock seat for over half an hour"
-Famed long distance rider and the Iron Butt Association President Michael Kneebone
Note: Our seat will fit on MXC models, however, there will be a gap between the bottom of the gas tank and the seat. Refer to the picture below before ordering a seat for an MXC.
|
|
|